Adding water to a garment steamer requires first disconnecting the power and allowing it to cool down. Then, open the water tank and fill it with purified water to the MAX mark. Finally, seal and install the steamer. The operation seems simple, but each step is crucial for safety and the machine's lifespan. Below is a clear guide to the process.
Preparation Before Adding Water: Safety First
- Disconnect the Power and Wait for Cooling: After use, always unplug the power cord and wait at least 15-30 minutes for the machine to completely cool down before operating it again to prevent scalding or sudden steam bursts.
- Confirm the Water Tank Type: Most garment steamers have a removable water tank (located in the handle or at the back of the machine), while some have a built-in tank (with a cover on the top or side).
Correct Water Adding Steps
Open the Water Tank
Removable: Press the latch or button to smoothly remove the water tank.
Built-in: Rotate counter-clockwise or lift the cover. Do not force it open.
Add Suitable Water
Use purified or distilled water to avoid minerals in tap water forming scale that can clog the steam vents.
Keep the water level below the MAX mark (approximately 80%) to prevent overflow during heating.
Reinstall and Seal
Align the water tank with the slot and push it in. A "click" indicates it is locked.
For built-in models, tighten the cap clockwise to ensure the sealing ring fits snugly.
Check Stability
Gently shake the machine to confirm there is no looseness or leakage before connecting the power for preheating.
Usage and Maintenance Tips
For first-time use, it is recommended to spray dry for 5-10 seconds: This removes any residual impurities from the factory and prevents staining of clothing.
Drain excess water after each use: This prevents water accumulation and bacterial growth, extending the machine's lifespan.
Regular Descaling and Maintenance: Clean the internal pipes every 1-3 months with citric acid or white vinegar.
